Alta U9000X Specifications   Printer friendly PDF Alta U9000X Specifications The Alta U9000X uses a very large format 9-megapixel full frame sensor with anti-blooming gates, ideal for applications requiring large field of view, such as astrophotography, sky surveys, and radiology. 3056 x 3056 array, 12 x12 micron pixels 5 MHz 12-bit and 1.8 MHz 16-bit digitization 32Mbyte camera memory USB 2.0 interface: no plug in cards or external controllers Programmable, intelligent cooling to 45C below ambient (D07 housing) / 60-65C below ambient (D09 housing) Binning up to 10 Horizontal x 3056 Vertical Subarray readout and fast sequencing modes Precision time delayed integration (TDI) readout Programmable fan speed for low / zero vibration Two serial port outputs for control of peripheral devices General purpose programmable I/O port External triggering and strobe controls ActiveX drivers included with every system (other software sold separately) Field upgradeable firmware Self-test capability with data simulators Fused silica windows Runs from single 12V supply with input voltage monitor Compact enclosure Programmable status indicators MaxIm DL/CCD and CCDSoft software packages are offered at special prices when purchased at the same time as a camera system. CCD Specifications CCD KAF-09000 Array Size (pixels) 3056 x 3056 Pixel size 12 x 12 microns Imaging area 36.7 x 36.7 mm (1345 mm2) Imaging diagonal 51.9 mm Linear Full Well (typ.) 110,000 e- Dynamic Range 84 dB QE @ 400 nm 37% Peak QE (550 nm) 64% Anti-blooming >300X Fill factor (microlensed) 93% Camera System Performance PC Interface USB 2.0 Max. Cable Length 5 meters between hubs; 5 hubs maximum (max. total of 30m) Digital resolution 12 bits at 5 MHz to 16 bits at 1.8 MHz System Noise (typical) 2 counts at 5 MHz; 10e- at 1.8 MHz Pixel Binning 1x1 to 10 x 3058 on-chip Exposure Time 30 milliseconds to 183 minutes (2.56 microsecond increments) Image Sequencing 1-65535 image sequences under software control Frame Sizes Full frame, subframe, focus mode Cooling (typical) Thermoelectric cooler with forced air. Maximum cooling 45° C below ambient temperature (D07 housing); 60-65C below ambient (D09 housing) Dark Current (typical) 1 e-/pixel/sec (-25° C; D07 housing); 0.1 eps for High Cooling D09 housing. Temperature Stability ±0.1° C Camera Head Size D07. Aluminum, hard blue anodized. 7" x 7" x 2.55" (17.8 x 17.8 x 6.48 cm). Optional High Cooling housing: D09. 7" x 7" x 3.25" (17.8 x 17.8 x 8.9 cm). Weight: 4.2 lb. (1.9 kg) Mounting 5.125" bolt circle. Optional Nikon or Canon lens mount. Back focal distance 1.142" (2.90 cm). Optional low profile housing D11 (no shutter): 0.61" ( 1.56 cm). Optional D09: 1.40" (3.56 cm) [optical] Operating Environment Temperature: -22° to 27°C. Relative humidity: 10 to 90% noncondensing Cable Length Standard: 15 ft. (4.5m) Power 40W maximum power with shutter open and cooling maximum. Power supplied by AC/DC “brick” supply with international AC input plug. Alternate 12V input for user’s source. Shutter D07 and D09: Melles Griot 63mm. Low profile D11: no shutter. Remote Triggering LVTTL input to camera allows exposure start within 25 microseconds of rising edge of trigger CCD Sensitivity ** All special prices are 100% prepaid, direct sales only. For non-USA customers, please consult your local dealer or Apogee if there is no representative in your area.