shop.ccd.com shopping cart checkout order tracking

 
Alta U98 Specifications

 

Printer friendly PDF
Alta U98 Specifications

The Alta U98 has a back-illuminated full frame spectroscopy format CCD with exceptionally high quantum efficiency across the visible and in the UV. The 14 micron pixels provide high spectral resolution.

  • 2048 x 14 array, 14 x 14 micron pixels
  • 500 kHz 16-bit digitization
  • 32Mbyte camera memory
  • USB 2.0 interface: no plug in cards or external controllers
  • Programmable, intelligent cooling to 50-55°C below ambient (D02 housing) / 70-75°C below ambient (D09 housing)
  • Binning up to 8 Horizontal x up to 14 Vertical
  • Subarray readout and fast sequencing modes
  • Precision time delayed integration (TDI) and kinetics mode readout
  • Programmable fan speed for low / zero vibration
  • Two serial port outputs for control of peripheral devices
  • General purpose programmable I/O port
  • External triggering and strobe controls
  • ActiveX drivers included with every system
  • Field upgradeable firmware
  • Fused silica windows
  • Runs from single 12V supply with input voltage monitor
  • Compact enclosure
  • Programmable status indicators

MaxIm DL/CCD and CCDSoft software packages are offered at special prices when purchased at the same time as a camera system.

CCD Specifications
CCD
Hamamatsu S9840
Array Size (pixels)2048 x 14
Pixel Size14 x 14 microns
Imaging Area28.7 x 0.2 mm (5.6 mm2)
Imaging Diagonal28.7 mm
Video Imager Size1.79"
Linear Full Well (typical)130K electrons
Dynamic Range74 dB
QE at 400 nm58%
Peak QE (600-700 nm)90%
Anti-bloomingnone
Camera System Performance
PC InterfaceUSB 2.0
Max. Cable Length5 meters between hubs; 5 hubs maximum (max. total of 30m)
Digital Resolution16 bits at 500 kHz
System Noise (typical)15 e- RMS at 500 kHz
Pixel Binning1x1 to 8 x 122 on-chip
Exposure Time30 milliseconds to 183 minutes (2.56 microsecond increments)
Image Sequencing1 to 65535 image sequences under software control
Frame SizesFull frame, subframe, focus mode
Cooling (typical)Thermoelectric cooler with forced air. Maximum cooling 50-55°C below ambient temperature (D02 Housing). 70-75°C below ambient temperature (D09 housing).
Dark Current (typical)Standard D02: 0.2 e-/pixel/sec (-30°C). High Cooling D09: 0.02 eps (-50°C).
Temperature Stability± 0.1°C
Camera Head SizeD02. Aluminum, hard blue anodized. 6" x 6" x 2.5" (15 x 15 x 6.35 cm) Weight: 3.1 lb. (1.4 kg) Low profile: D06. Wide Angle: D13. High Cooling: D09 (17.8 x 17.8 x 8.9 cm. 1.9 kg).
Mounting3.5" bolt circle. 2" 24 tpi thread. Optional Nikon F-mount or Canon FD or EOS/EF mount.
Back Focal DistanceStandard: 1.025" (2.60cm). Low profile: 0.460" (1.17 cm). D09: 1.40" (3.56cm). [optical]
Operating Environment-22° to 27°C. Relative humidity: 10 to 90% non-condensing.
Cable LengthStandard: 15 ft (4.5m)
Power40W maximum power with shutter open and cooling maximum. AC/DC "brick" supply with int'l AC input plug (100-240V, 50-60 Hz). Alternate 12V input from user's source.
ShutterStandard: Melles Griot 43mm. Low profile: no shutter. D09: Melles Griot 63mm.
Remote TriggeringLVTTL input allows exposure to start within 25 microseconds of rising edge of trigger

CCD Sensitivity

home | products | about | support | privacy policy | shop.ccd.com | contact us Copyright © Apogee Imaging Systems
151 Sunrise Ave. Suite 902, Roseville, California 95661
phone: 916-218-7450 fax: 916-218-7451